Thursday, May 16, 2024
HomeTechnologyTroubleshooting Comfast WiFi Extender Keeps Rebooting Issue

Troubleshooting Comfast WiFi Extender Keeps Rebooting Issue

Rebooting is one of the most effective solutions opted for by millions in order to revive their Comfast range extender’s performance. But, it can be painful if the Comfast WiFi extender starts rebooting by itself. In case you are facing the constant reboots of your Comfast range extender, then this post is what you should focus on for a few minutes.

We’re saying it because here, you will find a number of troubleshooting solutions that will help you get rid of random reboots of your Comfast wireless extender. But, before that, having a nudge on the reasons leading you to the issue will make troubleshooting easier.

Reasons: Comfast Extender Keeps Rebooting

  • Your Comfast extender isn’t getting a continuous power supply
  • There’s a communication gap between your WiFi devices
  • The distance separating the extender and the host router is too much to measure
  • You haven’t updated the Comfast firmware timely
  • The extender is placed in an area filled with WiFi interference

Now, let’s take you for a walk through the troubleshooting tips to get the issue resolved.

Fixed: Comfast Extender Keeps Rebooting

Tip 1- Check the Power Socket

As far as the insufficient power supply is concerned, it can occur due to two reasons. And the good news is that you can take care of the problem in both cases. In the first case, the power socket might be damaged whereas the other reason can be sudden power outages or surges. If the first case matches your situation, then consider plugging your Comfast extender into a wall socket that is working all well. In case you are a victim of the issue due to the second reason, it is advised to use a UPS.

Tip 2- Repair/ Replace Ethernet Cable

Did you not check the Ethernet cable’s condition after Comfast setup Do it right now. If changing the power socket doesn’t help you out, then chances are that the Ethernet cable holding a connection between your WiFi devices has undergone damage. So, look for the same. In case the truth supports our statement, the time to repair the Ethernet cable is near. What happened? Don’t want to waste time repairing the cable or it is too damaged? In that case, replace it with a new one.

Tip 3- Bring Your WiFi Devices Closer

Have you placed your Comfast extender and router at too much distance from each other? In that case, they won’t be able to communicate properly. Thus, we advise you do a little effort or reduce the distance between your devices. Additionally, your extender and router must not be too close. Else, you won’t even realize when their WiFi signals will get clashed pushing you into another pit of issues.

Tip 4- Update the Comfast Firmware

The firmware of your Comfast range extender controls every second activity of the device. It means whatever happens to your Comfast extender or done by your Comfast extender, the firmware holds the power. However, an outdated firmware version is not capable of providing your Comfast extender enough ability. Therefore, don’t waste time updating the firmware of your extender via the Comfast login page and see if the rebooting issue gets resolved.

Tip 5- Eliminate Signal Interference

Do you know that the WiFi signals of your extender get hampered by a few factors? These factors are known as WiFi interference. It means they either block WiFi signals or deviate them in the midway restricting them from reaching the destination which results in the issue you are currently facing. Therefore, without taking a minute, prepare a list of objects or devices surrounding your Comfast wireless extender and segregate them whether they can hamper the extender’s signals or not. After segregation, remove those objects or devices that can impact the extender’s efficiency.

Final Words

This was all that you can do in order to get the Comfast WiFi extender keeps rebooting issue fixed. In case the success is still not ready to knock at your door, do Comfast WiFi extender setup from scratch after resetting your extender. FYI, resetting can be executed with the push of the button on your extender.


Please enter your comment!
Please enter your name here


Popular posts

My favorites

I'm social